NOTE
If you find the application unpleasant, try reducing the
►
speed, adjust the pressure applied, change to a differ-
ent part of the body or stop the massage completely .
♦
To switch the appliance off, push the switch 2 back to the 0
position .
Cleaning
RISK OF ELECTRIC SHOCK
►
Before cleaning the appliance, always pull out the mains
adapter 6 from the mains power socket .
CAUTION! PROPERTY DAMAGE!
►
Do not use any aggressive cleaning agents or solvents .
They could damage the surfaces .
■
For easier cleaning, pull the massage rollers 4 off of the
appliance . Clean them in warm water with a little mild soap .
Rinse off the soap residues thoroughly and allow the massage
rollers 4 to dry in the air . When they are dry, push them back
onto the drive shaft of the massager .
■
Wipe the appliance with a damp cloth . If necessary, add a
little detergent to the cloth and wipe the appliance off after-
wards with a cloth dampened with clear water .
■
Wipe the mains adapter 6 and mains cable with a damp
cloth . Make sure the mains adapter 6 has completely dried
off before the next use .
│
GB │ IE
■
14
SMG 2.4 A1