Télécharger Imprimer la page

Peaq PDR220-B Mode D'emploi page 48

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 71
ENGLISH
USB Playback
1. Insert an USB Stick with MP3/WMA/
AAC music files.
2. Press MODE and select Music player.
3. Select USB playback.
4. Playback starts automatically and the
first track will be played. If there is no
USB device connected, the message
NO USB device found will be dis-
played on the screen.
Note
Connect the USB device directly to the
USB port of the unit. Using an extension
cable is not recommended and may cause
interference and failure of data transfer.
This product supports USB 1.1 and 2.0 up
to 32GB with file system FAT16 and FAT32.
AUX Mode
1. Connect the audio cable (not included)
into the AUX IN jack (3.5 mm) at the
rear side of the device.
2. Press MODE to select AUX as a
source.
3. Start playing from the device.
Attention
Check the safety and user instruction of
the external device before connection.
48
IM_PDR220_160303_A_V04_HR.indb 48
Time and Alarm settings
TIME SETTING
1. Press MENU in any mode setting and
select System settings.
2. Select Time/Date.
3. Press SELECT to confirm the selection.
4. Select the desired submenu with the
SELECT knob:
• Set Time/Date:
Manual time and date setting
• Auto update:
Selection between update from FM,
Network and No update
• Set format:
Selection between 12/24 hour format
• Set time zone:
Set daylight savings
SETTING ALARM
1. Press MENU in any mode setting and
select Main menu.
2. Select Alarms.
3. Select Alarm 1 or 2 in the main menu
or press ALARM button on the remote
control.
4. Select one of the two waking times in
order to save it:
3/3/16 11:19 AM

Publicité

loading