Installing The Battery - Gallagher I Série Notice D'installation

INSTALLING THE BATTERY

Always use 9V alkaline batteries for best performance.
1. Turn the battery compartment screw left 90
2. Remove the battery cover.
3. Fit the battery.
4. Replace the cover.
5. Turn the screw right, to fix the cover in place.
Note:
The remote battery has a life of approximately 6
months. A flat battery may give false measurements
so replace the battery when the icon shows.
Note: Approvals & Standards - FCC
This equipment has been tested and found to comply with
the limits for a Class A digital device, pursuant to part 15
of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the
equipment is operated in a commercial environment. This
equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential
area is likely to cause harmful interference in which case the
user will be required to correct the interference at his own
expense.
6
.
o