THOMSON CR221I Mode D'emploi page 17

• The charging time varies depending on charging capacity of the battery and its current residual capacity.
• The components may heat up during the charging process. They slowly cool down again after the
charging process.
USB charger slot
1. Connect an external device via a USB cable to the USB charging port on the back of the device
for charging.
2. The charge state is indicated in your external device as usual.
Remark:
- There will be some radio interference while the charging.
- Please charge your device with only one charging method.
- Please do not charge your device with wirless charge & USB cable together.
AUXILIARY (AUX) playback
The system must be "Turned On".If you want to play from AUX-IN jack, please connect the external
device via 3.5 mm plug jack(cable not included) to the AUX-IN jack. The display will show "AU". You can
hear the sound from the external device through the loud speakers and you may adjust the volume on the
external audio device. For further functions please refer to the user manual of the external audio device.
NOTE:
Adjust the volume of the external device to a comfortable level.
Cleaning and Maintenance
WARNING:
Do not immerse the device in water.
• Always remove the mains plug before cleaning the machine.
• Any marks on the surface can be wiped off with a slightly damp cloth without any additives.
- EN 7 -