Error Codes; Options Menu; Normal And Eco Mode - Marvel MA15C Série Instructions D'installation, D'utilisation Et D'entretien

Error codes:

The ice machine is monitored continuously. Any OPEN or
SHORTED circuit condition with a temperature sensor or
miscommunications between the control and user interface
Error
Bin Sensor error second intervals in the display. No
audible alarm will sound.
System Sensor error the display. No audible alarm will
Communication error

Options menu:

Normal and ECO mode:

Your ice machine comes with an optional "ECO" mode.
This new feature allows you to tailor ice production to a
conservative rate, saving approximately 25% energy and
30% water from routine operation. While in this mode
ice production will slow and the appliance will use less
water and electricity. "ECO" mode should only
be initiated after there is a full bin of ice. To enter
• Press the "MENU" icon twice and the green
• Press and hold the "ON/OFF" icon until the
illuminated.
• To return to the standard operating rate press the
"MENU" icon twice, the ECO will turn off and
and remains illuminated.
USING YOUR ELECTRONIC CONTROL
Displayed Code
Failed condenser temperature sensor. Machine operation
will continue but ice production cycle will not adapt to
sound. varying ambient conditions, so ice quality may vary.
Loss of communication between the main board and the
on the display.
ECO
Error Codes
Error Description
Failed temperature sensor. Machine operation will
immediately enter an OFF state.
user interface.
Changing the Tri-Color lighting: (MP15CP
Models Only)
Figure 23
ICE
The light switch for changing
the light color is located in the toe
grille. Move the switch (see Figure
23a) to the left or right to change
the color of the light between blue,
white, or amber.
16
Action to Take
Call service to have the
temperature sensor replaced.
Call service to have the
temperature sensor replaced.
Call service to have a
diagnostic check.
Figure 23a
Three position
slide light switch