Appliance Description; Operation And Use - Beem Multi-FiXX 500 Mode D'emploi

Multi-FiXX 500

Appliance description

(See illustration on the left fold-out page)
1 Motor unit
2 Rotary switch
3 Jug (750 ml)
4 Spindle attachment
5 Grating disc
6 Cutting/rasping disc
7 Chopper blade
8 Jug lid
9 Pusher
10 Collecting bowl
11 Drive attachment
12 Grater attachment
13 Blender blade unit
14 Sealing ring
15 Blender jug (1200 ml)
16 Blender lid
17 Lid lock
18 Accessories compartment
(back of the appliance)
19 User manual (not illustrated)
Rotary switch
Level Function
Impulse operation.
Run the appliance intermit-
P
tently at maximum power for
short intervals.
0 Appliance switched off.
Continuous operation:
1
low speed level
Continuous operation:
2
high speed level
22
Safety switches
The appliance is equipped with a safety
switch and can only be operated if the cor-
responding attachment has been correctly
fitted and locked onto the motor unit.
WARNING
► Before using each time, check the
function of the safety switch. Switch
on the appliance with attached jug
for this purpose. If the motor turns,
the safety switch is defective and the
appliance may not be used.

Operation and use

Switching the appliance on/off
The appliance is turned on and off via the
rotary switch (2).
Set the rotary switch (2) to level 1 or 2
‹
for continuous operation.
For impulse operation, turn the rotary
‹
switch (2) to level P. The appliance
runs at maximum speed as long as
the rotary switched is pressed.
BEEM - Elements of Lifestyle
EN