Philips 5000 Série Mode D'emploi page 26

English
26
7 sec.
- Each retaining ring has two recesses and two
projections that fit exactly in the projections and
recesses of the shaving head holder.
- Turn the ring clockwise until your hear 'click' and
the ring is fixed.
Hold the shaving head holder in your hand when you
reinsert the shaving heads and reattach the retaining
rings. Do not place the shaving head holder on a
surface when you do this, as this may cause damage.
8 Reinsert the hinge of the shaving head holder into
the slot of the shaving unit. Close the shaving head
holder ('click').
9 To reset the replacement reminder, press and hold
the on/off button for approx. 7 seconds.