Philips 5000 Série Mode D'emploi page 12

English
12
Note: After replacing the shaving heads, you need to
reset the replacement reminder by pressing the on/off
button for 7 seconds.
Turbo setting (specific types only)
The appliance is equipped with a Turbo setting. This
allows you to shave hard-to-reach areas more quickly.
Charging
Charging takes approx. 1 hour.
Note: You cannot use the appliance while charging.
Charge the shaver before you use it for the first time
and when the display indicates that the battery is
almost empty.
Charging with the adapter
1 Make sure the appliance is switched off.
2 Put the adapter in the wall socket (1) and put the
small plug in the appliance (2).
3 After charging, remove the adapter from the wall
socket and pull the small plug out of the appliance.