Télécharger Imprimer la page

BM2 BIEMMEDUE Ursa Minor Manuel D'utilisation Et D'entretien page 19

Générateur industriel de vapeur

Publicité

Les langues disponibles
  • FR

Les langues disponibles

WARNING: putting liquids into this tank that
are not plain running water, could jeopardise
the correct operation of the machine.
WARNING: only use the scale remover
recommended by the manufacturer to prevent
damage to the machine or injury to the user.
Failure or incorrect use of the scale remover
may cause the formation of lime sediments
with consequent hydraulic damage, thus
jeopardising correct operation of the machine.
-
-
Detergent tank (12): tank with 5 litre capacity to fill
with detergent mixed with water, according to the
procedures shown on the product label.
WARNING:
only
recommended by the manufacturer to prevent
damage to the machine or injury to the user.
Once the machine is set up as indicated, insert the main plug
(6) in the socket of a suitable system (see the "technical
specifications" chapter) and start the machine by turning the
main switch (2) to the "I" position.
4.4 - FIRST FILLING
Once the machine has been started, the electronics will make
sure the water level in the tanks and boiler are sufficient to
ensure correct operation of the machine.
If the water tank is empty, an alarm is displayed telling the user
to fill the tank in question. Once the tank is full, the level of liquid
present in the boiler is checked and if it are not sufficient a pump
is activated to reach the established level. The heating element
is not enabled in this phase.
At this point the machine needs to reach the nominal pressure
of 10 bar, visible on the pressure gauge (3) before being able to
start any operation.
To prevent the machine from moving accidentally use the
brakes located on the four casters.
5 – FUNCTIONS
Standard operation of the machine requires that the water and
detergent level in the tanks s ensured by the user who, if a
specific alarm is generated, performs the filling operation for the
tank in question.
Once the machine has reached the working pressure of 10 bar;
easy to recognise by the green light on the panel of lights ( 3)
the hose (1.a) needs to be inserted in the socket (1) making sure
it is perfectly hooked.
WARNING: the machine should not be dragged
by the hose to prevent malfunction problems.
If it is necessary to move the machine push it using the specific
handle (13) after unlocking the brakes located on the casters.
The keypad on the hose (1.a) can be used to activate the
"steam", "vacuum" and "detergent/hot water" functions.
Pressing the button quickly will activate the desired functionThe
selection mode is visible on the front panel of lights: one light on
indicates minimum power, two lights on indicates medium
power, three lights on indicates maximum power (for complete
information see the chapter "signal/alarm indicators"). The
"steam" and "vacuum" functions can be activated individually or
simultaneously.
The "detergent/hot water" function can only be activated in
combination with the steam function and permits a controlled
detergent/hot water intensity along with the jet of steam. Using
the commutator located on the ftop of the machine (3) it is
possible to select two different detergent/hot water delivery
intensities based on cleaning needs.
use
the
detergent
EN
WARNING: the "detergent" function can only
be activated together with the "steam"
function.
Once the desired function is selected for activating the delivery
it is necessary to use the trigger located in the lower part of the
hose handle.
6-SIGNAL/ALARM INDICATORS
REFERENCE
SIGNAL/ALARM
1
no water in tank alarm
2
steam ready indicator
3
Water activation indicator
4
Detergent activation indicator
5
maximum steam intensity
6
medium steam intensity
7
minimum steam intensity
8
no detergent in tank alarm
7 – DESCRIPTION
HOSE (1.a): consists of a handle, a sheath and a plug,
used to connect the accessory to the machine.
All of the accessories supplied with the machine can be
fitted on it by simply pushing the accessory on the handle
until the coupling system (3), located in the lower part,
clicks.
LIGHT
COLOUR
red
green
blue
blue
blue
indicator
blue
indicator
blue
indicator
red

Publicité

loading

Produits Connexes pour BM2 BIEMMEDUE Ursa Minor