Frequently Asked Questions (Faq) - Nyne NB-250 Manuel Utilisateur

6 Frequently asked
questions (FAQ)
Never try to repair the device yourself
as you may void your warranty.
When you encounter any problems,
read the FAQ before you take the
device for repair. You may also visit
www.nyne.com/support for help.
Contact your dealer if any of the
following occurs:
•
The power cord frays or fails.
•
Liquid sprays or any object drops
into the device.
•
The device is exposed to rain or
other moisture.
•
The device is dropped or damaged
in any way.
•
The performance of the device
changes substantially.
Why is there no power?
• Check whether you have slided
the switch on the back
panel to the correct position.
• Press on the top panel to turn
on the device.
• The built-in battery may be
drained. Recharge the device.
You can continue to use the
device when it is connected to AC
power. In this case, check whether
you have connected the power
cable to both the device and wall
socket securely; and whether the
mains power is interrupted.
14 EN
NYNE NB-250_User Manual_A5_V0.1.indb 14 NYNE NB-250_User Manual_A5_V0.1.indb 14
Why is there no sound or only distorted sound?
• Press on the top panel to
adjust volume.
• Check whether the sound output
is muted. Press
to resume sound output.
• Check whether the Bluetooth
connected device supports
Bluetooth profi le A2DP. Check
the user manual of the device for
details.
• Check whether wireless
connection has been set up
between the paired device and
NB-250.
• If you are listening from an auxiliary
device, check the following points:
•
Make sure that you have started
music play on your auxiliary device.
•
Try to adjust volume on your
auxiliary device.
•
Check whether the 3.5mm audio
cable has been connected
securely to both NB-250 and the
auxiliary device.
Why is it that I cannot find "NYNE NB-250" on the device
already paired with NB-250?
• Check whether you have turned
on NB-250.
• Make sure that you have enabled
the Bluetooth function on the
device paired with NB-250.
• You may have failed to pair
the device with NB-250. Or you
may have removed the pairing
information by pressing and
holding on the top of NB-250.
Repeat the pairing procedures.
• Check whether NB-250 is
connected wirelessly with another
paired device. NB-250 only
supports one Bluetooth connection
at a time.
on the top panel
8/27/2012 10:50:08 PM 8/27/2012 10:50:08 PM