Publicité
Les langues disponibles
Les langues disponibles
STEP 6 :
In order to place the Tumble Dryer (TD) on the Washing Machine (WM) and Stacking Kit assembly;
Firstly open 4 adjustable feet of Tumble Dryer (TD) by rotating them for 4-6 turns. (6.1)
- Lift the Tumble Dryer (TD) with two persons at least, and place it on the retaining duct (1). (6.2)
Check the stability of TD after opening the feet.
6.1
6.2
STEP 7 :
Move the Tumble Dryer (TD) forward on retaining ducts (1). (7.1)
Continue to slide the machine until feet are placed and secured on the duct over the retaining duct (1).
(7.2)
7.1
7.2
STEP 8 :
Remove the PT screws from the rearside body of TD as shown in the figure from left and right side.
These screws shall be used later. (8.1)
8.1
8 - EN
Publicité
