Beko PSK Guide D'utilisation page 6

Part No Part Name
1
Retaining Ducts
2
Screws
STEP 1 :
Place the plastic retaining (1a-1b) parts delivered in the box on
the Washing Machine (WM) as shown in the figure. (1.1)
Hint :
Geometric surfaces on the figure shall be faced against
each other.
STEP 2 :
Place the cosmetic appearance part (6) on the front face as
shown in the figure. (2.1)
Then use the "for plastics screws supplied in the box" to perform
the connection of the appearance part (6) to the left and right
retaining ducts (1). (2.2)
Hint :
Use powered screwdriver for this operation.
2.1
STEP 3 :
Align the cosmetic appearance part (6) to the cosmetically proper position with WM upper tray.
(3.1 - 3.2)
ENGLISH
Part No Part Name
3
Rear Support Connection Part
4
Rear Fixing Element
2.2
3.1
6 - EN
Part No Part Name
a - Self tapping Screws
5
b - Butt-End Torx Screw
6
Cosmetic Appearance Part
1b
1.1
6a
6
2.3
3.2
1a
6a