Publicité
Les langues disponibles
Les langues disponibles
OPERATION
Heater
• Connect the appliance to a safety socket.
• Turn the thermostat knob in the direction of clockwise
until reaching the maximum temperature.
• Turn on switch to the heating position (I or II).
0
O (Arrêt)
Ventilation
I
750 W
II
1500 W
• Once the room temperature is reached, slowly turn the
thermostat knob in the direction of anticlockwise until you
hear a click, then the heater stops heating and only the fan
is running.
• The heater will turn on and o the heating function
automatically to maintain the room temperature you have
set.
• Turn the switch to "0" position to switch o the heater.
Unplug the appliance then after.
Fan
• Turn the switch to the position «
• You may use the fan throughout the year to circulate the air
in the room.
» for the fan function.
Oscillation
Press the oscillation switch located in the top of back house
when the adjustable thermostat turns to the maxim position,
the fan heater will oscillate, and can oscillate from right to left
over a range of 70 °.
MAINTENANCE
1. Always disconnect the appliance and let it completely cool
before any maintenance.
2. Use a vacuum cleaner to remove dust on grilles.
3. Clean the outside of the unit with a damp cloth and then
dry it with a dry cloth. Never immerse the unit in water,
not let water drip into the unit.
STORING
1. Always disconnect the appliance, let it completely cool
and clean it before storing.
2. If you do not use the device for a long period, put back the
unit and the instruction manual to the original carton and
store in a dry and ventilated place.
3. Do not place any heavy items on top of carton during
storing as this may damage the appliance.
36 37
36 37
Publicité
