Beurer LR 330 Mode D'emploi page 22

Rinsing the tray
Rinse out the tray every 2 weeks with warm water. If the air is heavily polluted, the device is used intensively
or the water quality is poor, the air purifier must be cleaned at shorter intervals.
Before you can pull the tray out for cleaning, you must first pull the water tank out of the air purifier
from above. Remove any deposits in the tray using a soft cloth. When cleaning the tray, do not use any cor-
rosive, caustic or solvent-based cleaning products.
The tray is dishwasher-safe.
IMPORTANT
Regular cleaning is a prerequisite for hygienic and fault-free
operation. Always empty and thoroughly clean the water
tank and the tray of the air purifier if the device contains
water and has not been operated for longer than 3 days. A
lack of cleaning and hygiene can cause bacteria, algae and
fungi to form in the water.
Cleaning the disc set
Before cleaning the disc set, pull it upwards and out of the
device. Clean the disc set every 2 weeks with warm water
and a soft cloth. If it is heavily soiled, you can also clean
the disc set in the dishwasher. When cleaning the disc
set, do not use any corrosive, caustic or solvent-based
cleaning products.
If it is heavily soiled, you can also clean the disc set in
the dishwasher (max. 50°C). Remove the disc set from the tray and place it in the dishwasher. If there is
insufficient space in the dishwasher, create extra space by removing the cutlery basket, for example. The
disc set must not be bent or jammed when being placed in the dishwasher. Set the dishwasher to a gentle
cycle (for cleaning glass) and if possible remove the disc set before the drying process. The cycle must not
exceed a temperature of 50°C – otherwise the disc set may deform. Only continue to use the device when
the exterior of the disc set is completely dry.
Descaling the humidification discs and the tub
Depending on water hardness and if necessary, the tub and humidification discs must be descaled in order
to maintain the performance of the air washer. For this purpose, use a standard descaling agent and obser-
ve the information on the label.
Note: A light build-up of limescale on the humidification discs increases the evaporation output.
Cleaning the housing
Clean the housing of the air purifier with a damp cloth (water or a mild cleaning solution). When cleaning, do
not use any solvents or other aggressive or abrasive cleaning agents, as the surface may become damaged.
Storage
If you do not plan to use the device for a relatively long period of time, we recommend that you thoroughly emp-
ty, clean and dry the device and store it in the original packing in a dry environment, ensuring it is not weighed
down by additional items. Please ensure in particular that there is no water in the water tank or in the tray.
22