geo-FENNEL FIRT 800-Pocket Mode D'emploi page 18

MODE BUTTON
Menu navigation with the MODE button:
Set EMS
Set C/F
MAX/MI
N
LOCK on/off
HAL on/off
Set HAL
LOW on/off
Set LOW
Press MODE button 1 x
Set emissivity with ▼/ ▲ buttons.
Press MODE button 2 x
Set temperature units with °C / °F
with ▼/ ▲ buttons.
Press MODE button 3 x
Set minimum or maximum values
with ▼/ ▲ buttons [(indication: small
number displayed (1)].
Press MODE button 4 x
Switch LOCK on/off with ▼/ ▲
buttons. If LOCK is switched on a
permanent measurement will be
carried out. Pull trigger to switch
LOCK off.
Press MODE button 5 x
Enter high alarm mode with ▼/ ▲
buttons. Press MODE again to set
values.
Press MODE button 7 x
Enter low alarm mode with ▼/ ▲
buttons. Press MMODE again to set
values.
18