Colibri 5004.002 Manuel D'utilisation page 15

Art.Nr.
No d'art.
5004.002
Nr. art.
working after emptying trapped air inside (about 20s), then the cleaner can immerse into the
pool floor.
To get the cleaner out of the water
The cleaner will self-beach when finishing working, then use the hook to lift it out of the
c. To avoid damaging the pool wall or the cleaner, make sure that the cleaner does not touch it
while you remove it from the pool.
d. Before removing the cleaner from the pool, it is best to hang it 10 - 15 seconds above the pool
to drain it of water.
e. Turn off the cleaner after each use.
2.2 First-hand experience
a. Instructions for button and indicator
Switch
Push the switch to right, blue indicator is on, cleaner is started. Push the switch to left,
red indicator is off, cleaner is turned off.
Charge the cleaner when it is turned off.
www.colibriproducts.ch | Industriestrasse | CH-5728 Gontenschwil
pool.
Charging Port Indicat
or
15