Removing Clogs - Panasonic QUICKDRAW MC-V7522 Mode D'emploi

Bag Holder
Support du sac
à poussière
Supporte para
la bolsa

Removing Clogs

If the vacuum should become clogged:
➢ ➢ Ensure ON-OFF switch is OFF.
➢ ➢ Disconnect power cord from electrical
➢ ➢ Pull open suction inlet cover and
Suction
Inlet Cover
Couvercle
de l'entrée
➢ ➢ Check the nozzle hose to make sure
d'aspiration
Cubierta de
aspiración
Nozzle Hose
Tuyau de la
➢ ➢ The nozzle hose may be removed at
tête d'aspiration
Boquilla de
la manguera
➢ ➢ Remove dust cover and dust bag.
➢ ➢ Check bag holder area for clogging.
➢ ➢ Replace dust bag if full.
➢ ➢ Check and replace any clogged
➢ ➢ Clean agitators.
- 40-
outlet.
remove any clogs.
it is free from obstructions.
the wand attachment end in order to
remove clogs.
filters.