Panasonic QUICKDRAW MC-V7522 Mode D'emploi page 36

➢ ➢ Ensure ON-OFF switch is OFF.
➢ ➢ Disconnect power cord from electrical
outlet.
➢ ➢ Press handle release pedal and
rotate the handle down so the clean-
er is laying flat on the floor.
➢ ➢ Pry out light lens at slots.
➢ ➢ Remove old bulb from the socket by
pulling from socket.
➢ ➢ Replace bulb by pressing into socket.
➢ ➢ Only use a bulb rated 13 V AC-9
Watts.
➢ ➢ Reinstall light lens by snapping into
place.
➢ ➢ Return the cleaner to the upright
position.
- 36-