MediaShop Tiger Mode D'emploi page 3

HOW TO ASSEMBLE:
STEP 1: Place box in a clear, open space in the room that you wish to place the TIGER.
Remove all parts from the box.
STEP 2: Take into account all the piexes of your TIGER in the box. There should be:
1. 1 TIGER frame
2. 2 Base bars: 1 for the front (with wheels) and 1 for the back.
3. 2 screws and 2 fasteners for each base bar (4 screws and fasteners in total).
4. 1 T-bar handle with 4 screws with allen wrench holes
5. 2 Pedals
3.
6. 1 Allen wrench
Bar Screws &
7. 1 Wrench
Fasteners
Timer Clock
2.
Back Base Bar
1.
TIGER Base
Frame
STEP 3: With the Bike main frame in front of you, place front base bar at the front base of the frame (this is the
base bar with the wheels on it). Line up the screw holes while making sure the wheels face outward (Fig. 1a).
Hold the screw into the square hole (Fig. 1b) and insert so when inserted, the square should be fitted into the
square hole on the base bar (Fig. 1c). Screw fastener on top end of the screw and tighten securely with wrench. To
Ensure that the screw is on tightly, please use the wrench provided to tighten it. (Fig. 1d).
Fig. 1a Fig. 1b
4.
2.
T-Bar Handle
Front Base
Bar
T-Bar Handle
3.
Bar Screws &
Fasteners
6.
5.
Allen Wrench
Pedals
Fig. 1d
Fig. 1c
- 3 -
STEP 4: Place back base bar to the rear end of the main TIGER frame (Fig. 2a) and repeat the process from
STEP 3 (Figs. 2b and 2c).
Fig. 2a
STEP 5: With bases now securely
fastened, locate the T-Bar handle
(Fig. 3a). Place the T-bar into the
front cylinder tube in front of the
tiger seat (Fig. 3b). Align screw
holes on the cylinder with the
holdes on T-Bar handle (Figs.3c
and 3d). Insert Allen wrench hole
4.
screws into the holdes and tighten
Screws
securely with Allen wrench
provided.
7.
STEP 6: Locate the two bike pedals and place them in the desired length at the bottom portion of the t-bar cylinder
Flat Wrench
center piece (Fig. 4a). Insert the pedals in and secure tight with wrench (Fig. 4b).
Fig. 4a
STEP 7:
Congratulations! You just finished building your TIGER! Move the TIGER to its desired location within the room and
start your workout!
Fig. 2b Fig. 2c
Fig. 3a Fig. 3b
Fig. 3c Fig. 3d
Fig. 4b
- 4 -
Fig. 4c