Publicité
Les langues disponibles
Les langues disponibles
Cleaning your mask in the home
Your mask and headgear should only be handwashed by gently
rubbing in warm (approximately 86°F/30°C) water using mild soap.
All components should be rinsed well with drinking quality water and
allowed to air dry out of direct sunlight.
Daily/After each use:
•
To optimize the mask seal, facial oils should be removed from the
cushion after use.
•
Handwash the separated mask components (excluding headgear).
•
If the vent requires cleaning use a soft bristle brush.
Weekly:
•
Handwash the headgear. It may be washed without being
disassembled.
WARNING
Do not use aromatic-based solutions or scented oils (eg,
eucalyptus or essential oils), bleach, alcohol or products
that smell strongly (eg, citrus) to clean any of the mask
components. Residual vapours from these solutions can be
inhaled if not rinsed thoroughly. They may also damage the
mask, causing cracks.
CAUTION
•
If any visible deterioration of a system component is
apparent (cracking, crazing, tears or cushion damage), the
component should be discarded and replaced.
•
Avoid connecting flexible PVC products (eg, PVC tubing)
directly to any part of the mask. Flexible PVC contains
elements that can be detrimental to the materials of the
mask, and may cause the components to crack or break.
3
Publicité
