Yamaha MZ250 Manuel D'utilisation page 20

4
5
3. Move the throttle lever slightly to "
4. Turn the engine switch to "ON".
3 "ON"
3
5. Pull the recoil starter slowly until it is engaged,
then pull it briskly.
6. After the engine starts, warm up the engine
enough so that the engine does not stop when the
choke lever is returned to the original position.
4 Original position
7. Set the throttle lever in desired position.
5 " ": Decrease engine speed
6 " ": Increase engine speed
6
– 13 –
".