Digital 1200 Série Guide D'installation page 11

9
Creating server utility and device driver diskettes
If desired, you can create the required diskettes from
Windows-based workstations using these procedures.
1. Locate the Quick Launch CD-ROM disc in your
ServerWORKS software kit. Insert the CD-ROM disc into
the CD-ROM drive.
2. From the Start Menu, select Run qlaunch.exe from the
root directory of the CD-ROM disc. This program will
start automatically if Windows 95 or Window NT V4.0
are installed.
3. Select the Installations & Utilities button.
4. Choose either the Create Diskettes tab or the Utilities
tab. Utilities is the default. If you choose Create Disk-
ettes, first select a model, then a network operating
system and its version. Select Continue. If you choose
Utilities, select a server model to see the utilities for
that server.
5. Select the utility or driver you want, then select
Continue.
6. Insert a formatted, high density diskette into Drive A
and select Continue.
NOTE
For more information, refer to the ServerWORKS Quick
Launch Getting Started guide and the on-line help in the
ServerWORKS Quick Launch program.
Server Installation
The following is a list of device drivers you might need:
SCSI—enables your server to operate using the on-
board 7880 Adaptec controller.
Video—enables your server to operate using the on-
board video controller or other supported video cards.
Network—choose from several device drivers for
DIGITAL supported network interface cards.
The following is a list of bootable server utilities:
BIOS Upgrade Utility—enables you to update or restore
your server's BIOS.
Diagnostics—enables you to make bootable diagnostic
diskettes for use when troubleshooting your server.
11