Display Language; Software Version; Factory Reset; Playing A Compact Disc (Cd) - THOMSON MIC200IDABBT Mode D'emploi

brightness for the <Dim level> and <On level>. There are 3 options available, High, Medium and Low.

Display Language

You may change the display language of your radio. There are 4 options available: English, French,
German and Italian. An ' * ' will be displayed next to the current setting.
With your unit switched on (not in Standby mode):
1. Press and hold the Menu/Info button to enter the menu options.
2. Use the NEXT/PREV button to scroll to <System>. Press and release the STOP/SELECT button.
3. Use the NEXT/PREV button to scroll to <Language>. Press and release the STOP/SELECT button.
4. Use the NEXT/PREV button to scroll to your preferred language. Press and release the STOP/
SELECT button to confirm.

Software Version

You can check the software version of your radio.
With your unit switched on (not in Standby mode):
1. Press and hold the Menu/Info button to enter the menu options.
2. Use the NEXT/PREV button to scroll to <System > then press the STOP/SELECT button.
3. In the System menu, use the NEXT/PREV button to scroll to <SW version> then press STOP/
SELECT button.
The software version will be displayed.

Factory Reset

You can reset your radio and restore all original factory settings.
Note: Factory Reset may be used to clear the station list, the presets and sleep settings. This is useful
if you move the UNIT to a different location (when you move from one house to another, for instance),
as some stations may not be available in the new area.
With your unit switched on (not in Standby mode):
1. Press and hold the Menu/Info button to enter the menu options.
2. Use the NEXT/PREV button to scroll to <System > then press the STOP/SELECT button.
3. Use the NEXT/PREV button to scroll to <Factory Reset> then press the STOP/SELECT button.
4. Use the NEXT/PREV button to scroll to <Yes>.
5. Press the STOP/SELECT button again.
6. 'Restarting...' will be displayed. After a few seconds, the display will then go to Standby mode.
When you next power on your radio from Standby mode, it will begin an automatic scan for DAB stations.

Playing a compact disc (CD)

NOTE: Never touch the laser lens inside the CD compartment. Clean the laser lens using a CD cleaner
disc if it becomes dirty.
1. Press and hold the POWER/MODE button for 2 seconds to turn on the unit.
2. Press the POWER/MODE button repeatedly to select the CD function.
3. Press and hold the EJECT/+10 button to open the CD door and insert a CD into the tray (with
printed label side facing up).
4. Press and hold the EJECT/+10 button again to close the CD DOOR and the disc will rotate for a
few seconds, then play the 1st track automatically.
5. To temporarily stop playback, press the PLAY/PAUSE/SCAN button, and to resume playback,
press it again.
6. Press the STOP/SELECT button to STOP play.
REVERSE/FORWARD
1. The and
high speed.
2. Press the button once to hear the beginning of the current track. Press it two or more times to
Buttons are used to jump to a different track number or to scan disc tracks at
- EN 11 -