Changing The Scan Setting - THOMSON MIC200IDABBT Mode D'emploi

Changing the Scan Setting

In FM mode:
1. Press and hold the Menu/Info button until FM <Scan setting> is displayed. Press and release the
STOP/SELECT button. The current Scan setting will have an '*' in the top right of the display. There
are two different options from which to choose:
Strong stations: The scan will only stop when strong signal strength is received, which should also
result in better audio quality. When using this option, it is possible that a particular station that you
are scanning for may be missed.
All stations: The scan will stop for every station it receives, even if the signal strength is poor.
2. Use the NEXT/PREV button to choose from the two options available and press and release the
STOP/SELECT button to confirm.
Audio Mode
The radio will automatically switch between Stereo and Mono, depending on the quality of the signal
being received, but you can override this function and manually switch between Stereo and Mono.
1. Press and hold the Menu/Info button until FM <Scan setting> is displayed.
2. Use the NEXT/PREV to scroll to <Audio setting>. Press and release the STOP/SELECT button.
There are now two different options of 'Forced mono' and 'Stereo allowed' and the current setting will
have an '*' in the top right of the display.
3. Use the NEXT/PREV button to choose from the two options available. Press and release the
STOP/SELECT button to confirm.
Storing an FM Station Preset
Your radio can store up to 10 FM radio stations in its preset memory for instant access to your favourite
stations.
1. Tune the radio to the FM radio station that you wish to preset.
2. Press and hold the PROG/REP/PRESET button for approximately 2 seconds until Preset Store
<1:(Empty)> is displayed.
3. Use the NEXT/PREV to move to the preset location to which you would like to store the radio
station (1-10).
4. Press and release the STOP/SELECT button, the display will confirm Preset X stored, where 'X' is
the number of the preset (1-10).
Note: If there is already an existing FM station stored under a preset, it will be over-written when you
store the new station.
Tune to an FM Station Preset
In FM mode:
1. Press and release the PROG/REP/PRESET button. Preset Recall <1:> is displayed together with
the name or frequency of the station stored there, or (Empty) if no station has been stored.
2. Use the NEXT/PREV button to move to the Preset location and station that you would like to listen
to (1-10).
3. Press and release the STOP/SELECT button. The radio will instantly tune to that station and begin to play.
Note: If no FM station has been stored under the PROG/REP/PRESET button, Preset Empty will be
displayed, and then the radio will revert to the previously selected radio station.
FM Display Information
When listening to an FM station you can change the information that will appear on the second line of
the display.
Radiotext (RT) - This is scrolling text information supplied by the broadcaster. Information could be the
name of an artist or song title, DJ's name, contact details for the radio station, etc.
Program Type (PTY) - Such as 'Rock', 'Pop', 'Talk' or 'News'
Station Name or Frequency – e.g. BBC R4 or 93.30MHz
Audio Mode - Stereo or Mono
Time and Date - Supplied by the broadcaster.
1. Repeatedly press and release the Menu/Info button to cycle through the various information options.
- EN 8 -