After Treatment; Cleaning And Storage - Emjoi AP-3RP Mode D'emploi

After Treatment

8. After treatment, apply cream to your feet so that your
skin will be soft and tender.
9. Pull off the cone attachment and clean the device after
each use (see the "Cleaning and Storage" chapter).
10. Put the protective cover back on the device when it is
not in use.

Cleaning and Storage

CAUTION!
❐ Make sure the device is switched off.
❐ Although the device may be rinsed under running water,
it may not be immersed in water for a lengthy period of
time. It could be damaged!
❐ The attachments must not get wet. Do not immerse it in
water or clean them under running water!
❐ Do not use any caustic or abrasive agents to clean the
device. These could damage the surface.
1. For hygienic reasons, the device should be cleaned after
every use.
2. Remove the attachment from the device (see the "Chang-
ing Attachments" chapter) and brush off any fl akes of skin
which may remain on it.
3. Hold the head of the device under running water for 5
to 8 seconds.
4. Dry the device thoroughly.
5. Insert the roller and place the protective cover on the
device.
32