AEG MC 4431 CD Mode D'emploi page 45

FOLDER UP /DOWN  (1 on the remote control)
Press these buttons during playback in order to move
one folder upwards or downwards. The display, e.g.
F 01, appears briefly. Then the CD begins to play back
automatically. If this button is pressed in stop mode the
display also appears briefly.
II PLAY/PAUSE button
CD/MP3/USB/CARD (17)
Selects the USB connection or card slot
Programmed Play
This can be used to program any desired sequence of
tracks.
1. Press the  STOP key (7/2).
2. Press the PROG(RAM) key (6/4). The word PROGRAM
flashes in the display and „P01" (memory preset)
appears. Use the I / I (SKIP+/SKIP-) buttons
(15/16/3) to select the desired track and then press
the PROG(RAM) button again. The display changes to
memory slot P02.

NOTE:
In the case of CDs in MP3 format, press the FOLDER
UP /DOWN  button (1 on the remote control),
in order to change the folder.
3. Select the next track with the I / I (SKIP+/
SKIP-) key and press the PROG(RAM) key again.
Repeat the procedure until all the desired tracks are
selected.

NOTE:
As soon as the storage capacity of the tracks to be
programmed has been reached, the letters "FUL"
appear in the display.
4. Press the II PLAY/PAUSE key (18/6). The playback
starts. The selected track numbers are shown in the
display in the correct order and the symbol  DISC
or  MP3 and PROGRAM light up. Press this button
to pause briefly the playback.
5. Press once the  STOP key to stop the playback while
retaining the program.
6. To play the programme back again, press the II
PLAY/PAUSE button.
7. To delete the program, press the  STOP key twice.
The PROGRAM control lamp goes out.
The device stops automatically once the entire sequence
of programmed tracks is completed. The abbreviation
PROGRAM goes off and the programmed order of tracks
is deleted from the memory.
05-MC4431.indd 45
Then start playback with the
(18/6).
It is also possible to combine the programmed tracks
with the REPEAT function. After you have programmed
and started the device, please press the MODE button
(5/5) up to three times and then you can use the func-
tions as described under MODE".
Playing back Music in MP3 Format
With this device it is possible to play back pieces of mu-
sic in MP3 format. The device also supports all standard
CD types: CD, CD-RW, CD-R.
This machine of is able to play MP3 CDs. Up to 200 tracks
can be compressed and stored on these CDs. Your machi-
ne detects an MP3 CD automatically (the total number
of tracks and MP3s appears in the display). If you would
like to play one of these CDs, proceed as described under
„Playing CDs/MP3". Tracks can be programmed as descri-
bed under „Playing Back Programmed Tracks".
Please note:
There are a number of different recording and compres-
sion methods, as well as quality differences between CDs
and self-recorded CDs.
Furthermore, the music industry does not adhere to fixed
standards (copy protection).
For these reasons it is possible that in rare cases there are
problems with the playback of CDs and MP3 CDs. This is
not a malfunction of the device.
Cleaning and Maintenance
• Always remove the mains plug before cleaning the
machine.
• Any marks on the surface can be wiped off with a
slightly damp cloth without any additives.
Troubleshooting
Symptoms Course
CD can not be CD is not inserted
played back. or inserted incor-
rectly.
CD jumps during Check the disc
playback. for fingerprints,
dirt or scratches.
English
45
Solution
Ensure that the
disc is inserted
with the label
facing upwards.
Check the disc
for fingerprints,
dirt or scratches.
22.10.2009 17:00:53 Uhr