AEG MC 4431 CD Mode D'emploi page 44

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 17
English
44
Playing CDs/MP3
This is how you play a CD
1. Turn the function selector switch (14) to the „CD/
MP3/USB/CARD" position.
2. In order to open the CD compartment (1), press the
DOOR OPEN button (3).
3. Insert an audio CD with the printed side facing up-
wards on to the central cone so that the CD clicks into
place and then close the lid of the CD compartment.
4. After a few seconds the total number of songs/tracks
is shown in the display.
NOTE:
In the case of CDs in MP3 format the number of
folders is briefly displayed at first.
5. Press the II PLAY/PAUSE button (18/6) in order to
play the CD. The CD will play from the first title. The
track currently being played,  DISC or  MP3 are
shown in the display.
6. In order to remove a CD, please press the  STOP
button (7/2), open the CD compartment and lift the
CD out carefully.
Always keep the CD deck closed.
NOTE:
• With CDs in MP3 format the current track and
folder are shown alternately in the display.
• If a disc is incorrectly inserted - or no disc has been
inserted - the symbol „- - -" and the word „NOd"
(no disc) appear in the display.
• Playback of CDs produced by the user cannot be
guaranteed due to the large variety of software and
CD media available.
Description of the CD buttons
II PLAY/PAUSE (18/6)
You can briefly interrupt and resume playback using this
button.
The current track flashes in the display together
with the  symbol. Pressing again continues playback.
I / I (SKIP +/SKIP -) (15/16/3)
With an audio CD or a CD in MP3 format playing:
With I/SKIP + you can jump to the next or previous
track etc.
• If the button is kept pressed down, the machine
starts to search through the tracks (the sound is
muted).
05-MC4431.indd 44
• If the button is kept pressed down in stop mode the
machine quickly plays through the songs until the
desired track is reached. When the II PLAY/PAUSE
button is pressed the track begins to play back.
The I/SKIP - button can be used as follows:
Press once = This jumps back to the previous track.
Press twice = This plays the song before etc. If the
button is kept pressed down, the machine
starts to search through the tracks (the
sound is muted). If the button is kept
pressed down in stop mode the machine
quickly plays through the songs until the
desired track is reached. When the II
PLAY/PAUSE button is pressed the track
begins to play back.
 STOP (7/2)
The CD stops.
MODE (5/5)
Press once =
(the REP. emits a fixed light) the cur-
rent track is repeated continuously.
Press twice =
(the REP. ALL emits a fixed light) the
whole CD is played continuously.
Press three times = the display contains the word RAN-
DOM and the track number that is to
be played first. All tracks are played
back in random order.
Press four times = all functions are cancelled. The
normal play mode is resumed.
Only for CDs in MP3 format
Press once =
the current track is repeated conti-
nuously (REP. appears in the display).
Press twice =
the selected folder of the MP3 CD
is repeated continuously REP. ALBUM
appears in the display). With the
FOLDER UP /DOWN  buttons
(1 on the remote control) you can
select the individual folders.
Press three times = the whole CD is played continuously
(REP. ALL appears in the display).
Press four times = the display contains the word RAN-
DOM, MP3 and the track number
that is to be played first. All tracks
are played back in random order.
Press five times = the function is deactivated and the
CD is played in the normal mode.
22.10.2009 17:00:52 Uhr

Publicité

Table des Matières
loading

Table des Matières