Basic Playback; Listening To The Radio - Onkyo HT-S3800 Guide Rapide

SN29402473_HT-S3800_QSG_EnFrEs.book 13 ページ ２０１６年４月２５日 月曜日 午前９時４６分
Playback

Basic Playback

c
1. Switch the input on the TV to that assigned to the
unit.
a
2. Press INPUT SELECTOR (a) on the remote
control with the same name as the jack to which
you connected the player to switch the input.
3. Start play on the player.
4. Use VOL i/j (b) to adjust the volume.
0 You can switch the audio to suit the connected cable.
Press AUDIO SEL (c) to select H (HDMI cable), C1
(coaxial cable), O1 (optical cable), or A (analog audio
cable).
b

Listening To the Radio

1. Press TUNER (a).
2. Press BAND (b) several times to select either AM
or FM.
3. Press and hold TUNINGi or TUNINGj (c) for
a
about a second to start automatic tuning to a radio
station. Tuning stops when one is found.
You can preset up to 30 stations.
1. Tune into the AM/FM radio station you want to
register.
2. Press EDIT (d) so that the preset number on the
b
display flashes.
3. Press PRESETi or PRESETj (e) to select a
c
number between 1 and 30 while the preset number
is flashing.
4. Press ENTER (f) to confirm.
0 To select a preset radio station, press TUNER (a) then
press PRESETi or PRESETj (e).
d
e
f
En
13