Moving Your Trap - goodnature A24 Trap Manuel D'utilisateur

English

MOVING YOUR TRAP

1.
REMOVE COUNTER
3.
TEST FIRE
HOW TO MOVE TRAPS SAFELY
Rather than move your traps, it's better to add to your trap
network and increase your pest free area.
To move the trap, first remove the Counter and unscrew the
gas canister. You may hear any remaining gas in the canister
escaping. This may cause the canister to freeze rapidly, so it's a
good idea to unscrew the gas canister using a cloth to protect
your hands.
WARNING - REMOVE FINAL CHARGE FROM
THE TRAP
Although the gas canister has been removed, the trap may still
be live with one charge remaining in its chamber. Safely test fire
your trap by removing the Shroud Cap and the ALP, and using a
pen/twig reach down through the top of the trap and push the
10
2.
UNSCREW GAS
4.
DETACH TRAP
Trigger to one side. If there is still gas in the trap, the orange
Striker will be triggered, if nothing happens, all gas has been
flushed out and the trap is safe to move.
Always treat the trap as live until you have de-gassed and
test fired it. If the trap doesn't fire when triggered, the trap has
successfully been de-gassed.
With the trap de-gassed, your trap is now safe to detach from
the Trap Mount. Using your thumb and forefinger, squeeze the
Black Tabs and with upward pressure pull the trap up and off the
Trap Mount.
Always keep fingers clear of trap entrances.