Publicité
Les langues disponibles
Les langues disponibles
INSTALLATION MANUAL
DGLP60WLC
Hands-Free Proximity Card Reader - Wiegand
5] PRODUCT PRESENTATION
Dip 1 and 2:
Setting wiegand output
There are 3 types
of Wiegand output
:
- Wiegand 26-bit output
- Wiegand 30-bit output
- Wiegand 44-bit output
DGLP60WLC
ON
ON
26 Bit
30 Bit
DGLP60 WLC terminal blocks
Outputs
Correspondence
+
12V DC power supply
-
0 V
H
Clock
D0
Data 0
D1
Data 1
B
Buzzer
V
Green light
R
Red light
The hands free reader should not be installed on a metal surface. Use a separate power supply
for the DGLP60 WLC. Power the hands free reader before powering the controller.
ON
44 Bit
Dip 4: Pull ups 12V or 5V
Open collector outputs:
12V
ON
Select the output voltage
according to the installation.
Dip 3: Buzzer and LED
CDVI mode
- Standby, the LED and the buzzer
are both OFF.
(When a badge is presented
there is no feedback).
- Waiting for external commands
to activate the LED and the buzzer.
CENTAUR mode
- Standby, the LED and the buzzer
are both OFF.
(When a badge is presented
the LED light on orange for 150ms
and then turns red and the buzzer
is activated during 150ms.
- Waiting for external commands
to activate the LED and the buzzer.
Important : Dip 3 is set as soon as
power is applied.
cdvigroup.com
EN
5V
ON
ON
ON
5
Publicité
