i-tec C31HUBMETAL7 Mode D'emploi page 6

EN
INSTALLATION IN VE WINDOWS, MACOS, LINUX, ANDROID, CHROME OS
The HUB is installed automatically, no need install drivers. Connect the
connector of the power adaptor to the HUB and connect the power adaptor to a
socket outlet with 230V. Then connect the HUB via the USB-C cable to an open
USB-C port on your device and follow the instructions on the screen.
DESCRIPTION
1. 1x USB-C port PD (power delivery only) for connecting a USB-C power
adapter
2. 1x input USB-C for connecting to a device
3. 7x output USB 3.0 ports for connecting USB devices with quick
charging support (BC 1.2)
4. LED diode – the diode is ON when the HUB is connected to the power
adaptor or to a USB port of a notebook / PC
POWER SUPPLY
If high energy demand devices are connected (e.g. external drives, mobile
phones, etc.) it is important to connect a USB-C charging adapter – not
included. Otherwise, the laptop's USB-C port may not be capable of
supplying sufficient energy to operate these devices.
CHARGING
The HUB supports charging of the connected USB mobile equipment such
as smartphones (including iPhone and Samsung phones), e-book readers,
multi-media players, GPS navigators, and tablets. The HUB does not support
charging of iPad and Samsung tablets which require special identification
circuits. Using the original cable connect the equipment to be charged to
the USB port of the HUB. At the same time the power adaptor needs to be
connected to the HUB as well.
Attention: All USB 3.0 ports support quick charging (BC 1.2), but only allow
charging a maximum of 1 mobile phone at a time, provided the connected
6
Quick Start / USB-C Metal Charging HUB 7 Port