Deleting The Remote Controls Already Programmed With The Electric Servetto I3; Bluetooth Pairing - SERVETTO i3 Guide De Montage

For the 4 and 12-buttons remote controls, repeat the above indicated procedure for each button you need to synchronize with
the Electric Servetto i3.

6.1 DELETING THE REMOTE CONTROLS ALREADY PROGRAMMED WITH THE ELECTRIC SERVETTO i3

If you want to delete all the remote controls, press and hold the programming button (Fig. 22) for 10 seconds; when this button
is released, there will be three consecutive "BEEPS", indicating that all the synchronised remote controls have been deleted.
The desired remote control(s) can then be retuned.

7 BLUETOOTH PAIRING

After you ensure that the Electric Servetto i3 is connected to the power supply , download the "Servetto" app from
AppStore/Google Play Store.
The Electric Servetto i3 will automatically be detected opening the App and can therefore be selected and operated with the
smartphone.
8 DISPOSAL
This product falls within the scope of Directive 2012/19/EU concerning the management of waste electrical and electronic
equipment (WEEE).
The equipment must not be disposed of with domestic waste as it is composed of various materials that can be recycled at
suitable facilities. Information should be obtained from local authorities regarding the location of the most suitable recycling
centres that can accept the product and then either dispose or properly recycle the same.
Please note that if you purchase a similar piece of equipment, the distributor is obliged to collect and dispose of the product free
of charge.
The product is not potentially harmful to human health and the environment, since it does not contain dangerous substances, as
per Directive 2011/65/EU (RoHS). However, if not disposed of correctly, it negatively impacts the ecosystem.
Please read the instructions carefully before using the equipment for the first time. Under no circumstances should the product
be used for any purpose other than that for which it is intended, as there is a risk of electrical shocks should it be used
inappropriately.
The crossed-out wheelie bin symbol on the label affixed to the equipment, indicates that the product complies with
the legislation concerning waste electrical and electronic equipment.
Fly-tipping or illegally disposing of this equipment is punishable by law.
9 ENVIRONMENTAL INFORMATION
Advice for protecting the environment
PACKAGING
The packaging materials we use comply with the current environmental standards. If you have enough storage room, we
recommend retaining the product packaging for at least the duration of the guarantee period. If however, you would like to
dispose of the packaging, please do so in an environmentally friendly manner.
BATTERIES
The batteries are not ecological, i.e. "green". They should be taken to the waste collection and disposal facilities provided for
polluting products. In any case, they must not be disposed of incorrectly and in order to prevent this, we recommend using only
mercury-free batteries.
18
EN