Control Panel And Features - Inglis W11035214A Guide D'utilisation

Control Panel and Features

1
1 WASH TEMP
Wash Temp senses and maintains uniform water
temperatures by regulating incoming hot and cold water.
Select a wash temperature based on the type of fabric
and soils being washed. For best results, use the warmest
wash water safe for your fabric, as speci ed by the garment
label instructions.
On some models and cycles, warm and hot water may
I
be cooler than your previous washer.
Even in a cold- and cool-water wash, some warm water
I
may be added to the washer to maintain a minimum
temperature.
All rinses are cold.
2 WATER LEVEL
Set the Water Level knob to the Auto Sensing setting and
the washer will automatically sense the appropriate water
level for the load size and type.
Set the Water Level knob to the Deep Water Wash setting
and the washer will automatically add more water to any
cycle at any time during the wash process.
NOTE: Expect longer cycle times due to extended ll times
when using the Deep Water Wash option.
4
2 3
Not all features and options are available on all models.
Appearance may vary.
3 RINSE OPTION
Select the option most suitable for your load. Select Auto
w/Ex Rinse, Deep Water Rinse, or Deep Water w/Ex Rinse
if using fabric softener during a cycle. It ensures that fabric
softener is added at the correct time in the rinse for even
distribution.
WASH CYCLE KNOB
4
Use the Wash Cycle knob to select cycles on your washer.
See "Cycle Guide" for detailed descriptions of cycles.
START/PAUSE/UNLOCK LID/
5
CANCEL BUTTON
Press to start the selected cycle. Press again to pause the
cycle and unlock the lid. Close the lid and press to restart
the cycle. Press and hold to cancel a cycle and pump out
the washer.
NOTE: If the washer is spinning, it may take several minutes
to unlock the lid.
4
6 5