Quick Start (Introduction); Start Of Training; End Of Training; Standby Operation - Kettler SM3600 Mode D'emploi Et Instructions D'entraînement

Energy consumption
Points
Strain profile
1 point (height) = 1 Level
1. row = Level 1
Quick start
(Introduction)

Start of training:

without special settings
• Image shown after switch-on
Display of total kilometres "odo"
• After 5 seconds: Display "Count Up"; all values indi-
cate 0;
Strain shows Level 1
• Start of training
Display
Scale, Pulse (if measurement of pulse is active),
distance, level, energy, time, revolutions, speed and
time
Change of the strain during training:
• "Plus": display value next to "BRAKE" is increased in
steps of 1.
• "Minus" reduces in steps of 1
Continuation of the training with this setting. Changes of
strain in the meantime are possible at any time.

End of training

• Average values (Ø):
Display
Pulse (if measurement of pulse is active), level, revoluti-
ons and speed
• Total values
Distance, energy and time

Standby operation

The display goes to standby operation 4 minutes after the
end of training. Press any button, display re-starts with

"Count Up".

Display of text and values
G
25 rows
SM3600, SM3640-68, SM3645-68
Value 0 – 9999
Dimension adjustable
1 column corresponds to 1
minute or in case of home
trainers: 400 m or 0.2 miles
and in case of cross trai-
ners: 200 m or 0.1 miles
23
GB