Wiring Diagram; Light Switch - Whirlpool UXT4030AD Guide D'utilisation
Masquer les pouces
Voir aussi pour UXT4030AD:
Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Replacing the Incandescent Light Bulb
Turn off the range hood and allow the light bulb to cool.
1. Disconnect power.
2. Squeeze the plastic lens cover and remove it from the hood.
WIRING DIAGRAM
Light Switch
On - Off
SE113B
BK
W
Motor Characteristics
Power Supply
120 VAC
Frequency
60 Hz
0.35 ±10% A
Amperage
Wattage Rating
21 ±10% Watts
Motor Resistance
46.9 ±10% Ohms
White - Red
37.2 ±10% Ohms
White - Black
N
3. Screw a 120V, 75W maximum, incandescent light bulb with
E26 base into the socket.
4. Replace the lens cover by squeezing the cover and inserting
the tabs into the slots.
5. Reconnect power.
If the new light does not operate, make sure the light bulb is
inserted correctly before calling service.
Motor Switch
Low - Off - High
BK
Ground
Screw
C10
GND
L
9
Publicité
Table des Matières
