Bigben PS One Mode D'emploi page 13

press [Up] or [Down] to select the month and press [SDR] to confirm the desired month, then
to set the DAY, digits will flash. Press [Up] or [Down] for you to select the desired day , Press
[SDR] to confirm.
• The next step is to set the time,press the "SDR",first digit is flashing for Hour input, press [Up]
or [Down] to select the desired hour then confirm it by pressing [SDR] again, next step to setup
Minute,. Please press [Up] or [Down] to input the desired minute then confirm it by pressing
[SDR] again
• Press [SDR] for thrice or when confirmed hour value input, device entry output sound selection
and display show "S 1", press [Up] or [down] to select as below:
To play each buzzer , display show S1, S2 or S3 .
• press [SDR]confirm, next step to select the Sound level setup from V01 to V08 max), press [Up]
or [Down] to change V02, V03......V08(max) , and user can hear sound of selected output level,
make it comfortable and confirm by pressing [SDR] again
• When sound level is confirmed, press [SDR] again go to projection ON(P O)/CLOSE(P C)
selection, , press [up] or [down] then display show projection "ON" or "OFF",
ON : when SDR active , projection will active together
OFF: when SDR active, projection will not work together
Press [SDR] confirm and the icon
4) How to review the date
4.1: With the clock displayed, press the `Display' button once and the year will appear;
4.2: Press "Display" 2nd time to show day and month;
4.3: Press "Display" 3rd time to show the date of week;
4.4: Press `Display' 4th time to return to the main display;
5) Using NAP timer
5.1: Press and hold the `NAP' button and the display will show the `NAP' time ie: 60,45,30,15, OFF.
When you reach your selected time then press and hold the `NAP' button to store your setting.
6) Using dimmer function
6.1: To reduce the brightness of the display press `Snooze / Dimmer'. There are 3 x levels to
choose from which are selected by pressing the `Dimmer' button once each time. When you have
selected your desired level leave the button and your setting will be stored.
7) Open
7.1: When the alarm activates press `OPEN / Alarm Off' button to disable the alarm.
8) Snooze
8.1: When the alarm, or SDR timer, activates press the `Snooze|Dimmer' button once and the
alarm will be deactivated for 9 minutes.
9) Lighting operation
9.1: Press the `Power / Light On' button to activate the light effect. You can choose between 2 x
light effects by changing the removable slide (see items C & D on the General Description section).
9.2: The images can be rotated by turning the `Light effect rotation' wheel (item B).
10) Battery Back-Up
10.1: To maintain the time and alarm settings, (in the event of a power cut), insert 2 x AAA Alkaline
batteries in to the battery compartment (see item G). Batteries should be fitted by, or under the
supervision, of an adult.
Product specification
• Power Source: 5V d.c., 500mA
• Power consumption : 2 Watts
show the display.
- EN 5 -