B E For E Star Ti Ng Ope R Ati O N; Moto R Overlo Ad Protection - SOLIS GELATERIA PRO TOUCH 8502 Mode D'emploi

Y OUR GE L ATE R IA P RO T O UCH IS
▲ ▲
FITTE D W ITH T H E S E E X T RAS
A UTO MATIC REFRIGE RATION FUNCTION
■▲ ▲
To keep the ice cream resp. yogurt cold for a while after preparation, the automatic
refrigeration function switches on after the respective program has elapsed (in the
ice cream function only for approx. 20 minutes).
In the ice cream function: After the ice cream preparation has ended and if no
GB
other function has been activated, the appliance switches to automatic refrigeration
function. After 10 minutes, the cooling unit and the fan switch on, "COOL" lights
up in the screen. After another 10 minutes, the appliance switches to standby mode,
the refrigeration function stops, the appliance emits 3 sound signals.
In the yogurt function: After the yogurt preparation has ended and if no other
function has been activated, the appliance switches to automatic refrigeration func-
tion, "COOL" lights up in the screen. The cooling unit and the fan switch on for
15 minutes and cool the yogurt mixture down to approx. 9°C. After that, both the
cooling unit and the fan switch off. Thanks to a temperature sensor, the tempera-
ture of the yogurt is being monitored. If it rises above 9°C, the cooling unit and the
fan switch back on for another 4 minutes. The machine continues cooling in this
4-minute rhythm until the appliance is switched off.

MOTO R OVERLO AD PROTECTION

■▲ ▲
Once the ice cream mixture starts to solidify and the preparation is finished, the
mixing motor stops, meaning that the stirring tool stops rotating. This is a safety
precaution to prevent the motor from overloading. However, the time keeps count-
ing down in the display, the ice cream is kept cool until you switch the appliance
off with the POWER button resp. until the time setting reaches "00:00". You can
switch the appliance off with the POWER button and take the ice cream out once
the stirring tool stops.
114

B E FOR E STAR TI NG OPE R ATI O N

▲ ▲
• Attention: Your Solis Gelateria Pro Touch is fitted with a compressor that
always requires an upright position. Never separate appliance from feet and
always place on feet with the opening facing upwards. Always use and store
appliance standing on feet.
• Only tilt the appliance to a maximum degree of 45°C. Should the appliance be
tilted by accident during transport or be turned upside down, leave it standing
on its feet for at least 3 hours before switching it on again.
• Before using your ice cream machine for the first time, remove all labels and
stickers (excl. the type plate). Make sure to take all accessories and appliance
parts out of the packaging before disposing it.
• Take the lid, the ice cream container and the stirring tool, the plastic spatula
and the measuring cup out of the machine. Clean these parts with some mild
detergent and warm water and rinse all parts carefully. Dry all parts.
• Caution: Always make sure that all parts are clean and dry before starting to
use the appliance.
GB
115