Publicité
Les langues disponibles
Les langues disponibles
2. Twist cable shielding and black cable together, then crimp with
a cable end-sleeve.
3. Twist red and brown cable together, then crimp with a cable
end-sleeve.
4. Connect the black cable/cable shielding to the negative contact
and the red-and-brown cable to the positive contact of the 12 V
on-board power supply or of the alternative 12 V plug.
Test the connection to the 12 V on-board power supply or
alternative 12 V plug
1. Measure the electrical passage of the following connections:
ACCUVAC connector
+
•
positive contact of connecting block/plug against positive
contact of the 12 V on-board power supply or of the
alternative 12 V plug
•
negative contact of connecting block/plug against negative
contact of the 12 V on-board power supply or of the
alternative 12 V plug
6
EN
BASE STATION
connecting block
–
+
MEDUMAT Transport
connector and protec-
tive carrying case for
MEDUCORE Standard
–
+
not assigned
–
Publicité
