Technical Data; Installation - Dometic DW2410 Notice D'utilisation

14
Dry water drop signs on
glasses and dishes

Technical data

Dimensions
Water supply pressure
Capacity
Information on the electrical connection, voltage and overall power is given on the rating
plate on the back of appliance.

Installation

Warning! Make sure that mains plug is
disconnected from the mains socket
during installation.
Fitting the appliance
Put the appliance adjacent to a water tap and
a drain.
When you put the appliance in place, make
sure that the water hoses are not kinked or
squashed.
Install the appliance on a kitchen sink, work-
top or built-in..
Positioning
Install the dishwasher into the furniture of the
kitchen.
The cleaning results are not satisfactory
• Increase rinse aid dosage.
• The detergent can be the cause.
Width mm
Height mm
Depth mm
Minimum
Maximum
Place settings
Min. 465
Min. 455
Make sure that the dimensions of the recess
agree with the given dimensions.
Make sure that there are openings in the fur-
niture for the inlet hose, the water drain hose
and the mains cable.
Adjusting the level of the appliance
Make sure that the appliance is level to close
and seal the door correctly. If the level of the
appliance is correct, the door does not catch
on the sides of the cabinet. If the door does
not close correctly, loosen or tighten the ad-
justable feet until the appliance is level.
0,5 bar (0,05 MPa)
8 bar (0,8 MPa)
Min. 485
450
460
480
5