Operating Tips; Switching Off The Appliance; Setting The Temperature; Additional Functions - Junker JC BC Série Manuel D'utilisation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

en Additional functions

Operating tips

Once you have switched on the
¡
appliance, the set temperature is
only reached after several hours.
Do not put any food in the appli-
ance until the temperature has
been reached.
The housing around the freezer
¡
compartment is temporarily heated
slightly. This prevents condensa-
tion in the area of the door seal.
When you close the door, a va-
¡
cuum may be created. The door is
then difficult to open again. Wait a
moment until the vacuum is offset.

Switching off the appliance

Press
.
The appliance stops cooling.
a

Setting the temperature

After you have switched on the appli-
ance, you can set the temperature.
Setting the refrigerator
compartment temperature
Press
repeatedly until the tem-
perature display shows the re-
quired temperature.
The recommended temperature in
the refrigerator compartment is
4 °C.
→ ""OK" sticker", Page 41
Setting the freezer compartment
temperature
In order to set the freezer compart-
ment temperature, "change the re-
frigerator compartment temperat-
ure" → Page 40.
The refrigerator compartment tem-
perature influences freezer com-
partment temperature. Refrigerator
40
compartment temperatures that
are set to warm generate warmer
freezer compartment temperatures.

Additional functions

Additional functions
Find out which additional functions
Additional functions
can be used for your appliance.

Super function

With the Super function, the refriger-
ator compartment and the freezer
compartment cool more intensively.
This refrigerates or freezes food
quickly right through to the centre.
Switch on the Super function 4 to
6 hours before placing food weighing
2 kg or more.
In order to utilise the freezer capacity,
use the Super function.
→ "Freezing capacity", Page 42
Note: When the Super function is
switched on, increased noise may
occur.
Switching on Super function
Press
repeatedly until
up.
Note: After approx. 48 hours, the ap-
pliance switches to normal operation.
Switching off Super function
Press .
lights

Publicité

Table des Matières
loading

Table des Matières