Remote Control Keys - Philips 20PF8846 Instructions

Remote control keys

TV / PC / Radio (p. 10)
Press one of these keys to switch
the television between TV, PC or
radio mode.
List of programmes
To display / clear the list of
îÏ
programmes. Use the keys
select a programme and the key
display it.
Select peripherals (p.4)
Press several times to select the
required EXT connector.
Most equipment (decoder, video
recorder) carries out the switching
Sleeptimer
To select the length of time before
the set automatically switches to
standby (from 0 to 240 minutes)
To call up or exit the menus.
Cursor
These 4 keys are used to move
around the menus.
Volume
To adjust the sound level
To mute or restore the sound.
Screen information
To display / remove the programme
number, the time, the sound mode
and the time remaining on the timer.
Hold down for 5 seconds to
permanently display the programme
number on the screen.
* Manufactured under license from Dolby Laboratories."Dolby" and the double-D symbols are trademarks of Dolby Laboratories.
to
¬
to
itself.
`
Y
SMART
-
Menu
MENU
+
"
-
Mute
1
4
7
Ë
Standby
To set the TV to standby mode.To
switch the TV set on again, press
b
, P
Surround Sound
To activate / deactivate the surround
sound effect. For models equipped
with Virtual Dolby Surround*, you
can experience Dolby Surround Pro
Logic sound effects.
Sound mode
.
Used to force programmes in
Stereo
RADIO
or, for bilingual programmes, to
choose between
The
forced position.
ù
ı
16:9 Format (p. 11)
SMART
Smart picture and sound
ª
Used to access a series of
predefined picture and sound
settings.
¤
The
settings selected from the menus.
Teletext (p. 9)
+
Selecting TV programmes
To move up or down a programme.
The number and the sound mode are
[
P
-
displayed for a few seconds.
For some TV programmes the title of
the programme appears at the
2 3
bottom of the screen.
Numerical keys
5 6
For direct access to programmes.
For a 2 digit programme number,
8 9
the 2
before the dash disappears.
Á
0
Previous programme
To access the previously viewed
programme.
@ # 0 9
or .
and to
Nicam Stereo Mono
or
Dual I Dual II
indication is red when in
Mono
position relates to
personal
nd digit must be entered
.
3