Maintenance - Sagem Axium HTD501 Manuel D'utilisation

Warning
1.2.

Maintenance

• Before doing anything, disconnect the mains lead from the wall socket.
• Clean the cabinet using a soft, slightly damp cloth and a non-abrasive and non-wax detergent.
• Never use Benzene, alcohol or petroleum-based cleaning products as these could damage the
finish.
• Clean the screen carefully using a soft, damp cloth lightly impregnated with a soap solution.
This FLAT SCREEN DLP™ uses high voltages. Never attempt to access the interior of
the apparatus, except when you are changing the lamp unit.
Only suitably qualified persons are authorised to do this.
Do not open or dismantle this product as this will expose you to the risk of electrocution.
This appliance will auto-detect the end of the lamp's working life. Replace the lamp as
soon as the "bulb" indicator lights up on the front panel.
When the FLAT SCREEN DLP™'s lamp reaches the end of its working life, there could
be a loud, sharp sound when it stops working. The appliance will only work when you
replace the bulb.
To avoid burns or the lamp unit exploding whilst it is being replaced, you must
disconnect the mains lead from the wall socket.
Make sure that you follow the whole replacement procedure described in
"Changing the lamp unit" on page 23 and 24.
Only use suitable batteries that comply with the maker's specifications (see "Technical
Specifications" page 26):
- the batteries supplied are not rechargeable;
- pay particular attention to environmental matters;
- take the defective or used batteries to the places provided for this effect in
accordance with current regulations; never throw them in the dustbin.
3