Leer PACE EDWARDS ULTRAGROOVE ELECTRIC Notice D'installation page 8

Rail
Rail Guide Rail
Rail Guide
Lead Rib
threaded into
Lead Rib
rail
threaded into
rail
• Then you can thread the Lead Rib into the rail and push the rail forward to the end of the canister
(FIG 5E & 5F). If you have difficulty threading the Lead Rib into the rail, you can gently lift up on the lead
rib with your left hand, while pushing the rail forward with your right. Next, push the cab caps into the front
of the rails (FIG 5G). Finally secure the rail to the canister with the Rail Screws provided with flat washer
and lock washer (FIG 5H).
Cab Cap
Cab Cap
8
STEP 5: INSTALLING RAILS
Rail
Rail Guide
Lead Rib
threaded into
rail
FIG. 5E
FIG. 5E
FIG. 5F
Cab Cap
FIG. 5G
FIG. 5G
CONTINUED
FIG. 5E
Left Rail
FIG. 5G
Left Rail
Lock Washer
Lock Washer
FIG. 5F
FIG. 5F
Left Rail
Lock Washer
Flat Washer
Rail Screw
Flat Washer
Rail Screw
FIG. 5H
FIG. 5H
Fla
Ra