Main Functions - air&me ISAC Guide D'utilisation

MAIN FUNCTIONS

[ MODE ] BUTTON
D
The [ Mode ] button allows you to choose among 3 heating powers:
• Fan : The device blows cold air. A dot appears on the digital display (
ring is blue.
• Warm heat : The unit blows hot air and operates at 1000W. Two dots appear on the digital
display ( ). The luminous ring is green.
c
• Hot heat : The unit blows hot air and operates at 2000W. Three dots appear on the digital
display ( ). The luminous ring is red.
d
[ TIMER ] BUTTON
D
Pressing the [ Mode ] button for 5 seconds will start the unit's timer. With the [ Timer setting ]
buttons ( and (
A
display flashes 3 times to confirm the setting. Once the programmed time has passed, the
unit will turn off automatically.
[ OSCILLATION ] BUTTON
E
The [ Oscillation ] button allows you to activate the oscillation of the heater. The heater will
rotate on itself at an angle of about 70°.
ADDITIONNAL FUNCTIONS
THERMOSTAT
The heater has a built-in thermostat that allows you to program a desired temperature between
16 and 37°C. To do so, simply set the desired temperature using the [ Temperature setting ]
buttons ( ) and (
A B
In [ Warm Heat Mode ] and [ Hot Heat Mode ] (green or blue illuminated ring), the heater will
blow "cold" air as soon as the target temperature is reached.
WIFI
To turn on the [ Wifi ] function, press the [ Raise ] (
A dot appears and flashes in the lower right of the digital display (
pairing between the device and your smartphone. Once this pairing is complete, you will be
able to control the heater remotely, as long as you have an internet connection.
), you can set the unit's operating time between 1 and 9 hours. The
B
). The screen flashes 3 times to confirm the setting.
) and [ Oscillation ] (
A
). The luminous
b
) buttons simultaneously.
E
). This activates the wifi
e
13