air&me ISAC Guide D'utilisation page 15

FAQ
Problem
The appliance
does not work
Drop in the
appliance
performance
Abnormal noise
The unit does not
produce hot air
The unit
continues to
blow after being
switched off.
Warranty
The appliances are under warranty for a 2-year period from the purchase date. The warranty covers all failures
resulting from hidden manufacturing or raw material defects. This warranty does not cover failures or damages
resulting from an inadequate setup or usage, or from the normal wear and tear of the product. Spare parts are also
available for a period of 2 years after the date of purchase.
Air&me cannot be held liable in case of an inadequate or dangerous use of the products.
DEEE
Disposal of Electric and Electronic Equipment (Applicable in the countries of the European Union and other Europe-
an countries with separate collection systems appropriate). This symbol on the product indicates that this product
shall not be treated as household waste. It should be handed over to the applicable collection point for the recy-
cling of EEE (Electrical and Electromagnetic Equipment). By ensuring this product is disposed of correctly, you will
help prevent potential negative consequences for the environment and human health. The recycling of materials
will help to conserve natural resources. For additional information about recycling of this product, please contact
the municipality, the waste or the retailer.
Reason
> The product is not correctly
plug or there is an electrical
problem.
> There is a problem on the
electrical system of your
house.
> The air inlet or outlet is
obstructed by something.
> Something obstructs the fan.
> The product has a
functioning problem.
> The [ Fan Mode ] is on.
> This is normal: the unit's fan
shuts off a few seconds
after being switched off to
cool down more quickly.
Solution
> Plug the socket correctly and
check the voltage and the good
functioning of your electrical
system.
> Leave at least 50cm behind,
around and in front of the
appliance.
> Make sure that no object obstructs
the air flow.
> Contact your reseller for service
support.
> Press the [ Mode ] button to select
[ Warm Heat Mode ] or [ Hot Heat
Mode ].
15