Technical Data - air&me ISAC Guide D'utilisation

ENGLISH
Thank you for having purchased the ISAC connected heater, an air&me product.
We hope that it will bring you complete satisfaction and improve your indoor air
quality.
As with all electrical appliances, it is important to maintain the appliance properly
in order to avoid any damage or injury. Please read these instructions carefully
before switching the appliance on and keep them for later reference. WAF-direct
society accepts no liability for any damage that is caused by noncompliance with
this instruction manual. The appliance is only to be used in the household for the
intended purposes described in this user manual. Using the appliance for other
purposes than the intended ones or performing technical changes to the appliance
could be hazardous for health and life.

TECHNICAL DATA

Voltage
Dimensions
Net weight
Heating powers
Maximal power consumption
Suitable for rooms up to
Maximum noise level
Built-in thermostat
Oscillation
Protection class
DOMESTIC INJURY PREVENTION
The safety of this product conforms to the relevant norms and regulations in force in
the European Union.
For any further information, please visit our website: www.airandme.fr/en
Our customer service department is available at the following email address:
info@airandme.fr
To prevent from any danger or electrical shock, always unplug the product when you are
not using it, moving it or cleaning it. In case of repairs, approach the qualified persons.
10
220-240 V ~ 50-60 Hz
255 x 170 x 170 mm (H x W x D)
2,1 kg
3
2000 W
30 m²
50 dB
Yes
Yes
2