Hdd/Ssd Disk Installation; Installation Instructions - LDLC MERCURE MH33-2S Guide D'utilisation

LDLC MERCURE
Note :
a. Use only Micro SD / SDHC card with a maximum 256Go capacity
b. When a Micro SD / SDHC card is inserted or removed, the device may take a few seconds to
update the content.
c. Avoid inserting or removing a Micro SD / SDHC card when an operation is in progress, this may
cause a system lock-up.
d. NEVER remove a Micro SD / SDHC when the content is being read. This may cause a system
failure or lock-up.
e. Use your nails to insert or remove the Micro SD / SDHC carefully.
f. Ensure that the Micro SD / SDHC car dis properly inserted with the contact pins facing downwards.

HDD/SSD disk installation

Precautions
• Static electricity may damage your system components. To protect them from
any damage linked to static electricity during the installation, briefly touch a
non-painted metallic part of your computer's chassis or wear an antistatic wrist
strap before touching or handling the intern components. These two methods are
efficient to discharge the static electricity naturally accumulated in your body.
• To protect your HDD / SDD, do not touch its connectors.
• Carefully read the User manual instructions of your HDD / SDD before installation.
• Needed tools: 1 cross headed screwdriver for 2.00mm head screws.

Installation Instructions

1. Ensure that the environment in which you are operating is exempted of electrostatic
charges. Clear your working space of any plastic bags or papers.
2. Switch your computer off. Once turned off, unplug the power cord.
3. Place the laptop upside down on a stable surface.
4. Unscrew with a cross-headed screwdriver the two screws on the HDD/SSD cover
as indicated on the picture below and then remove it.
U S E R ' S G U I D E
26
EN