Side Views; Memory Card Installation - LDLC MERCURE MH33-2S Guide D'utilisation

LDLC MERCURE

3. Side views

1
1. Power indicator light: ON, the computer is charging. Off, the computer isn't
charging.
2. AC plug: Allows to connect the AC adapter cord.
3. USB 3.0 slot: Allows to connect USB 3.0 peripherals, such as a mouse, keyboard,
USB stick, external hard drive, printer...
4. Mini HDMI connector: Allows to connect with an external screen. HDMI technology
offers a fully digital transmission without an audio/video signal compression
5. Memory card slot: micro SD/SDHC memory card reading.
6. Headphones output: headphones/speakers output.
7. USB 2.0 slot: Allows to connect USB 2.0 peripherals, such as a mouse, keyboard,
USB stick, external hard drive, printer...

Memory card installation

To install a memory card, spot the card slot on the side of the device, then insert the
memory card inside the slot in the right position, as shown below.
Check that the memory card is in the right position with the contact pin facing downward as
illustrated below.
The cut piece in the corner must be oriented outwards and on the right side. Note that you can
damage the card and the slot if the Micro SD isn't inserted in the right position.
• INSERT the Memory Card: Gently push the Micro SD card in the slot until a click occurs.
• REMOVE the Memory Card: To take out the Micro SD card, push the card again until a click
occurs.
2
3 4
U S E R ' S G U I D E
5 6
25
EN
7