Scope Of Supply And Product Overview; Start-Up - Eurotops CD-026M-1 Mode D'emploi

Scope of Supply and Product Overview

8
7
6

Start-up

ATTENTION!
❐ Connect the lamp only to a wall socket, which correspond to the technical data of the lamp
(see chapter "Technical Data").
❐ Place the lamp only at a min. distance of 20 cm to fl ammable materials such as curtains etc.
1. Unpack all parts and check the scope of supply for completeness (see chapter "Scope of Sup-
ply and Product Overview"); also check for transport damage. If you fi nd any damage to the
components, do not use them (!), but contact our customer service department.
2. Place the lamp on an even, stable, and dry underground so she can't fall down.
3. Remove the packaging material from the bulb. This serves merely to secure the device dur-
ing transport.
4. Check if the bulb is placed correctly into the mounting and the lamp holder.
5. Turn the head of lamp into the desired position. The fl exible lamp neck allows you to adjust
it continuously.
6. Insert the mains plug into an easily accessible, correctly installed mains socket.
7. Now you can turn the lamp on and off. Therefore set the On/Off switch to position I (on)
or position O (out).
00852_DE-GB-FR-NL_V5.indb 12 00852_DE-GB-FR-NL_V5.indb 12
1 Head of lamp
1
2 Mounting
3 Lamp holder
4 Continuously adjustable lamp neck
5 Base
6 Connection cable
2 7 On/Off switch
8 Bulb
3
4
5
Similar to this shown
12
26.09.2013 10:38:09 26.09.2013 10:38:09