Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
English
8
2
Remove any sticker, protective foil or plastic from the appliance.
preparing for use
attaching the handgrip
1
To connect the telescopic tube to the handgrip, press the spring-
loaded lock button on the handgrip (1) and insert the handgrip into
the tube (2). Fit the spring-loaded lock button into the opening in the
tube ('click').
2
To disconnect the tube from the handgrip, press the spring-loaded
lock button and pull the handgrip out of the tube.
attaching the nozzle and accessories
1
To connect the nozzle or an accessory to the tube, press the spring-
loaded lock button (1) on the tube and insert the tube into the floor
nozzle (2). Fit the spring-loaded lock button into the opening in the
nozzle ('click').
Note: You can also connect the nozzle or accessories directly to the handgrip in
the same way.
2
To disconnect the nozzle or an accessory from the tube, press the
spring-loaded lock button and pull the nozzle out of the tube.
hose
1
To connect the hose, push it firmly into the appliance ('click').
Note: Make sure that the projection of the hose fits into the recesses.
2
To disconnect the hose, push the buttons (1) and pull the hose out
of the appliance (2).
Publicité
Table des Matières
